LG S5300, User Manual

Page: 67 / 91

67
]
Access point : A data connection via data call
(CSD) using the GPRS or the even faster EDGE
service (see the Internet section for more
information about EDGE) is needed to download
multimedia messages from the server. Up to 5
connection profiles can be set for multimedia
messages.
The following menu can be accessed by pressing
the left soft key [Options] on the profile of your
choice:
]
Activate : Enable the selected profile and makes it
ready for use.
]
Settings : Enter the MMS server connection data
provided by your operator or service provider.
- Homepage
Set the multimedia message service centre
(MMSC).
- Bearer
Data
GPRS
- Data settings
This is only shown if you select Data as the
connection service.
IP address : Enter the multimedia service centre IP.
Dial number : Enter the telephone number to be
used for the connection.
User id : User id for own server connection (NOT
WAP gateway user ID).
Password : Password requested by own server
connection (NOT by WAP gateway) for
identification purposes.
Call type : Select the type of data call - analogical
or digital (ISDN).
Call speed : Set the connection speed for data -
9600 or 14400.
Linger time : Set the length of time after which
the phone must disconnect itself if no data have
been transferred.
- GPRS setting
This menu is only shown if you select GPRS as
the connection service.
IP address : Enter the multimedia service centre IP.
APN : Enter the APN (Access Point Name) of the
GPRS.
Me
ssage
s