LG S3 ERB Series, Owner'S Manual

Page: 43 / 188

ENGLISH
43 MAINTENANCE
Problem Possible Cause Solutions
Control panel won’t
respond Control panel or button has
dirt on it Dirt or foreign objects on the control panel
will interfere with the operation of the
buttons. Clean the control panel.
Control panel is locked Disable the Control Lock function.
The cycle won’t start Start/Pause was not touched
after the cycle was set. Touch Start.
Cycle is producing steam There may be a period of inactivity while
steam is produced.
Control panel is locked Disable the Control Lock function and
touch Start.
Operation
Problem Possible Cause Solutions
Clothes are wet at the
end of the cycle Filter is clogged or grill is
upside down Clean the lint filter. Insert the grill with the
holes on the right side.
Door gasket is damaged If the rubber door gasket is damaged, it
leaves a gap in the door seal, affecting
performance of the appliance. Call for
service.
Clothes caught in door Make sure all items are completely in
the cabinet and not stuck in the door,
blocking it from closing completely. Run
the cycle again.
Odor is not removed at
end of cycle Clothes were stored for a
long period of time or are
stained with a strong-smelling
substance Odors can be particularly difficult to
remove from clothes that have been
stored for long periods or have strong-
smelling, oily stains. Wash the clothes
first, before using the Styler.
Wrinkles are not
removed at end of
cycle Clothes were stored for a long
period of time Wrinkles may be very difficult to remove
if set for a long time, especially in cotton
and linen fabrics. Iron clothes that have
been stored for a long period of time
before treating them with the Styler, to
remove wrinkles more effectively.
Clothes have an
unpleasant odor at end
of cycle Appliance has not been used
for a long time or water tanks
and filters have not been
cleaned Check for dirt or foreign objects in the
water supply and water drain tanks. Clean
the filters and water tanks.
Functions are not
operating properly Detergent or fabric softener
put in water supply tank Do not use anything but clean water in
the water supply tank.
Performance