2
.
When an object (e.g. your hand, rubbish) is
within the detection range of the sensors, the lid
will open automatically.
The indicator light will illuminate green.
The detection range is approximately 10 cm.
3.When the object is out of the detection range,
the lid will automatically close
after a few seconds.
30L / 50L SENSOR BIN
INSTRUCTION MANUAL
This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application,
such as for non domestic use or in a commercial environment.
Different types of batteries or new and used batteries are not to be mixed.
Batteries of the same or equivalent type as recommended are to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the product.
Attention should be drawn to the environmental aspects of battery disposal. Don't throw used batteries in dustbin. Please contact
your retailer in order to protect the environment.
The batteries (batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNINGS
!
IMPORTANT SAFETY INSTRUCTIONS
!
Read these instructions and keep them for future reference.
Do not disassemble, modify, or attempt to repair the product.
This product is intended for the collection and storage of waste items until their ultimate disposal.
This product is only suitable for use indoors.
The product is not a toy and should be kept out of the reach of children.
Children shall not play with the appliance.
Make sure that all parts are not damaged before use and that they are assembled correctly. Improper assembly may result in injury. Damaged
parts could adversely affect safety and function.
CAUTION! FIRE HAZARD! Do not throw any hot ashes, embers or other hot objects into the sensor bin.
Do not expose the product to the extremely high or low temperatures, strong sunlight, wet or damp places.
Do not subject the product, particularly the lid, to any impacts. Otherwise this may result in damage to the product.
This mark is applied to show the equipment conforms to
European safety and electro-magnetic compatibility standards.
Symbol
OVERVIEW
1.Lid
2.Lid handle
3.CLOSE button
4.Indicator light
5.OPEN button
6.Power switch
GETTING STARTED
1
.
Place the top part with the lid facing downwards onto a sufficiently
large, scratch-resistant surface.
2
.
Remove the battery cover by sliding it in the direction of the arrow.
3
.
Insert 4 carbon zinc D size batteries in the battery compartment
observing the correct polarities.
4
.
Reattach the battery cover to the top part.
Installing the batteries
!
NOTE
: Remove the batteries from the product if it is not in use for long periods of time.
Using the retaining ring
Make sure the sensor bin is placed onto a firm, level surface.
1
.
Place a bin liner inside the sensor bin.
2.Use the supplied removable retaining ring to hold the bin liner secure.
3.Fold the excess edges over the ring inside the sensor bin.
4.If the bin liner is wrapped properly with the retaining ring, it will not be
seen when the bin is closed.
MODEL 1412256
1412280
DISPOSAL
OPERATION
Remove the top part of the sensor bin.
Clean the outer surface of the top part with a slightly dampen cloth. Dry
thoroughly. Never immerse it in water.
Clean the other parts with warm soapy water. Rinse and dry thoroughly.
Do not use any abrasive or chemical cleaning agents.
CLEANING AND MAINTENANCE
As a responsible retailer we care about the environment.
As such we urge you to follow the correct disposal procedure for the
product, packaging materials and if applicable, accessories and batteries.
This will help conserve natural resources and ensure that the materials are
recycled in a manner that protects health and the environment.
You must follow laws and regulations about disposal. Waste electrical
products and batteries must be disposed of separately from household
waste when the product reaches the end of its life.
Contact the store where you bought the product and your local authority to
learn about disposal and recycling.
The batteries must be disposed of at your local
recycling point.
We apologise for any inconvenience caused by
minor inconsistencies in these instructions, which
may occur as a result of product improvement and
development.
Darty Plc © UK: EC1N 6TE 02 / 05 / 2014
1
.
Switch on the sensor bin by setting the power switch to the “I” position.
The indicator light will flash red at regular intervals as long as there is no
operation.
4
.
Switch off the sensor bin if it is not in use.
The indicator light will go out.
To manually open or close the sensor bin, press OPEN / CLOSE.
EN
Downloaded from www.vandenborre.be
