38
PROGRAMMING MODE
2. Factory reset - EEPt
After a factory reset, all values are reset to the default values.
Entering set up
mode.
You will see LqC1
Button
display
Press the
Med Temp.
or the
Low Temp.
Button until
appears in the display.
Press the
Start
button.
Press the
Med Temp.
button until
appears in the
display.
Press the
Start
button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type - Push “High Temp.” + “Low Temp.” and the ‘3’.
• Dryer default value for CARD/COIN machine.
- Drying time
50 Minute
- Top off time
10 Minute
• Drying time in OPL machine can be changed from 10 to 100 Minutes by pressing the cycle button.
NOTE
