36
PROGRAMMING MODE
1.
Pressing the Start button cycles to the next test function.
Number of times
the Start
button is pressed
Checking point
Display
None
LqC 1
1 time
Check the version and code of
machine.
■
COIN TYPE : AU:OE
■
OPL TYPE : CA:PE
Version and code of machine (All LED on)
COIN machine displays AU:OE and gU:XX
alternately. OPL machine displays CA:PE and gU:XX
alternately. XX is the version number
2 time
PDA CHECK
Ir--
3 time
Motor runs.
Measured moisture value (70~239)
4 time
■
TYPE: Heater runs.
Motor + Heater 1 (2250W)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
5 time
■
TYPE: Heater runs.
Motor + Heater 1 (2250W) + Heater
2 (2250W)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
6 time
LED & KEY CHECK
Press High Temp. button.
Press Med Temp. button.
Press Low Temp. button.
Press No Heat button
Version and code of machine
7 time
Test ends.
LqC1
During check, if the
door is open.
Door switch
(Motor & Heater Off, Buzzer beeps
seven times)
dE
(The door is open. Please close the door completely)
During check, if the
door is closed
Test goes back at step 2.
(Motor on & Heater Off)
Measured moisture value (70~239)
During LqC1 test, if no buttons are pressed for 4 minutes, machine will be turned off automatically.
Do not use
.
NOTE
MFL62512853_171010.indd 36
2017.10.10 9:51:50 AM
