LG RU-42PZ90 - Stand For 42 Inch Plasma EDTV Monitor, Service Manual

Page: 8 / 34

- 8 -
Set ID
Set ID
- Use this function to specify a plasma display ID number.
• Baud rate : 115200 bps (UART)
• Data length : 8 bits
• Parity : None
* Use a crossed (reverse) cable.
• Stop bit : 1 bit
• Communication code : ASCII code
Communication Parameters Communication Parameters
1. Press the MENU button and then use
D D
/
E E
button to select the
SPECIAL
menu.
2. Press the G G button and then use
D D
/
E E
button to select
Set ID
.
3. Press the G G button and then use F
/
G button to adjust
Set ID
to choose the desired
plasma display ID number. The adjustment range of
Set ID
is 1 ~ 99.
4. Press the ENTER button to save.
SPECIAL
Prev.
Language
Key lock
ISM Method
Low power
Set ID G G
Caption / Text
Captions
OSD Rotate
SPECIAL
MENU
1
Transmission
* [Command 1]: First command to control PDP set. (j or k)
* [Command 2]: Second command to control PDP set.
* [Set ID]: You can adjust the set ID to choose desired plasma
display ID number in Special menu. Adjustment
range is 1 ~ 99. When selecting Set ID ‘0’, every
connected PDP set is controlled. Set ID is indicat-
ed as decimal (1~99) on menu and as Hexa deci-
mal (0x0~0x63) on transmission/receiving proto-
col.
* [DATA]: To transmit command data.
Transmit ‘FF’ data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0x0D’
* [ ]: ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
T T ransmission / Receiving Protocol ransmission / Receiving Protocol
OK Acknowledgement
* The Plasma display transmits ACK (acknowledgement)
based on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present
status data. If the data is data write mode, it returns the
data of the PC computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The Plasma display transmits ACK (acknowledgement)
based on this format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Data 1: Illegal Code
2: Not supported function
3: Wait more time
01. Power k a 0 ~ 1
02. Input Select k b 0 ~ 6
03. Aspect Ratio k c 0 ~ 3
04. Screen Mute k d 0 ~ 1
05. Volume Mute k e 0 ~ 1
06. Volume Control k f 0 ~ 64
07. Contrast k g 0 ~ 64
08. Brightness k h 0 ~ 64
09. Color k i 0 ~ 64
10. Tint k j 0 ~ 64
11. Sharpness k k 0 ~ 64
12. OSD Select k l 0 ~ 1
13. Remote Control Lock Mode k m 0 ~ 1
14. PIP/Twin k n 0 ~ 3
15. PIP Size k o 0 ~ 1
16. Split Zoom k p 21 ~99
17. PIP Position k q 0 ~ 3
18. Treble k r 0 ~ 64
19. Bass k s 0 ~ 64
20. Balance k t 0 ~ 64
21. Color Temperature k u 0 ~ 3
22. Red Adjustment k v 0 ~ C8
23. Green Adjustment k w 0 ~ C8
24. Blue Adjustment k $ 0 ~ C8
25. PIP Input Source k y 0 ~ 6
26. Abnormal Status k z 0 ~ a
27. ISM Method j p 0 ~ 3
28. Low Power j q 0 ~ 1
29. Orbiter Time Setting j r 1 ~ FE
30. Orbiter Pixel Setting j s 0 ~9
31. Picture Size Setting j t 0 ~64
for Double Window mode
32. Auto Configure j u 1
COMMAND 1 COMMAND 2 DATA
(Hexadecimal)
•
When setting the 27 ~ 32, a menu doesn’t display on
screen.
Command Reference List
Command Reference List
EXTERNAL CONTROL DEVICE SETUP