manualshive.com logo in svg

LG RU-27FB30C, Installation And Operating Manual, Page: 53 / 56

Share
Download
LG RU-27FB30C Installation And Operating Manual Download Page 53

Troubleshooting

Page 53

Symptoms 

Possible Cause(s) 

Possible Solution(s) 

 Page(s)

Camport (front 

• Equipment not connected.

Connect Audio/Video equipment to

18/19

Audio/Video)   

front Audio/Video.

source not selectable.

No Camport image.

•  Equipment not turned on.

Turn on equipment connected to front 

18/19

(front Video)

Video input.

S-Video Source not

•  Camport (front Video)

Disconnect equipment connected to 

18/19

selectable.

   connected.

front Video jack.

• Not connected.

Connect S-Video equipment to S-Video In.

18/19

No S-Video image.

•  Equipment not turned on.

Turn on equipment connected to S-Video In.

No S-Video audio.

•  S-Video audio not 

Connect audio for S-Video to Audio In R - L.

14/18/19

   connected.

(Use Audio In L jack to connect one audio wire.)

Antenna/Cable

• Front Video connected.

Disconnect equipment connected to front Video.

18/19

not selectable.

•  S-Video equipment 

Disconnect S-Video equipment from 

14/19

   connected.

rear jackpack.

No Antenna

•  Not Connected

Connect over-the-air antenna or cable service 

10/11

Cable image.

wire to Antenna/Cable jack.

Rear Audio Video

• Front Video connected.

Disconnect equipment from front Video jack.

18/19

not selectable.

•  S-Video equipment 

Disconnect S-Video equipment from 

14/19

   connected.

rear jackpack.

Go to Setup menu, select Add/Del/Blank option.

Press 9-9-9 to select AUX. Press MENU

select "Added" in Add/Del/Blnk option in 

Setup menu. (See Installer menus.)

No rear Audio

* Equipment not turned on.

Turn on equipment connected to 

Video image.

rear Audio/Video.

* Equipment not connected.

Connect equipment to rear Audio/Video.

12/14

Source Selection / Source Image Problems

Summary of Contents for RU-27FB30C

























































Reviews:

No comments