19
HOW TO CHARGE THE BATTERY
Check 1:
If the battery is not charging even when the Robot Cleaner
is attached to the home station, check the following items.
- Turn the power switch on the rear-left of the Robot
Cleaner off once and then on again.
- Check the power lamp of the home station.
- Wipe the terminals on the home station with a dry cloth.
(p33)
The Battery level is indicated on the Status Display, as follows.
• If recharging is in progress, the Battery Level indicator flashes showing the battery charge status level.
• If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save the energy.
• Upon the need for recharging, only the first level of the Battery charge level indicator will be on and flashing.
The status indicators show the
different pending conditions
during charging mode.
※
If Robot Cleaner goes back to the Home Station, in need of a charge
during the cleaning mode, the Cleaning mode indicator will continue
to flash during charging to indicate that cleaning was disrupted as the
battery required charging.
- When the 'Clean Mode' lamp continues to flash after recharging is
complete, Robot Cleaner will then resume cleaning the areas which were
not previously completed.
- Pressing the 'Start' button on the Remote Controller or 'Start/Stop' button on
main unit whilst it is recharging, with the 'Clean Mode' lamp flashing, will also
manually force the Robot Cleaner to find and clean the uncovered areas.
- Pressing the "Start" button on the remote control or the "Start/Stop"
button on the Robot Cleaner after the Charging has completed will make
the Robot Cleaner start to clean from the beginning again.
Remaining Battery Charge Indicator
If the Battery is Not Charging
Flickering
In the case of no existing area
to be cleaned after charging.
In the case of an existing area that the
Robot Cleaner will resume cleaning
when charging has completed.
(flashing Cleaning indicator)
Power lamp
Charge terminal
Charging is required
Middle
Low
High
