background image

w

w

CAUTION

9

Violating this direction may cause injury or damage house or furniture. Always be careful, please.

Wait for 5 minutes or
longer when
reconnecting the plug.

It may cause the operation of
the freezer to fail.

Supply the automatic ice maker with
drinkable water only
(only for the model
with the dispenser).

Otherwise, it may cause
any risk.

After 

5minutes

Drinkable 

water

Do not touch food or containers at the
freezer with wet hands.

It may cause frostbite.

Do not put ice in thin crystal cup or
ceramic ware.

It may break cup or ceramic
ware to cause injury.

Pull out the power plug not by grasping 
the cord but the plug
of its end.

It may cause electric shock
or short circuit to fire.

Do not put bottle in the freezer.

It may freeze the
contents to break the
bottle to cause injury.

Do not insert the hands into the bottom
of the refrigerator.

The iron plate of the
bottom may cause injury.

Do not install the refrigerator in the wet
place or the place
which water or rain
splashes.

Deterioration of insulation of 
electric parts may cause 
electric leakage.

Because opening or closing the door of
the refrigerator may cause injury to the
person around it, be careful, please.

Opening or closing the
door may cause feet or
hands to be caught in
the chink in door or the
child to be get hurt by
the corner.

Carry the refrigerator with the handle bar
at the bottom of the front and the top of
the rear.

Otherwise, your hands
may be slipped to
cause injury.

Do not put any living
animal in the
refrigerator.

Summary of Contents for REFRIGERATOR 3 DOOR













































Reviews: