USING YOUR REFRIGERATOR
REFRIGERATOR SECTION
REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to
meet your individual storage needs. Your model
may have glass or wire shelves.
Storing similar food items together in your
refrigerator and adjusting the shelves to fit
different heights of items will make finding the
exact item you want easier; it will also reduce the
amount of time the refrigerator door is open,
saving energy.
IMPORTANT:
Do not clean glass shelves with
warm water when they are cold. Shelves may
break if exposed to sudden temperature changes
or impact, such as bumping. For your protection,
glass shelves are made with tempered glass,
which will shatter into small pebble-sized pieces.
NOTE:
Glass shelves are heavy. Use special
care when removing them to avoid dropping
them.
Adjusting Shelves
Remove shelves from the shipping position and
replace shelves in the position you want.
• To remove a shelf
—Tilt up the front of the
shelf. Lift up the back and pull out the shelf.
• To reinstall a shelf
—Tilt up the front of the
shelf and guide the shelf hooks into the slots at
a desired height. Then lower the front of the
shelf so that the hooks drop into the slots.
w
w
CAUTION :
Make sure that shelves are level
from one side to the other. Failure to do so
may result in the shelf falling or spilling food.
• Folding a shelf
—You can store taller items
such as a gallon container or bottles by simply
pushing the front half of shelf underneath back
half of shelf.
Pull toward you to returm to a full shelf.
BOTTLE HOLDER
Bottles can be stored laterally with this wine
holder. It can be attached to any shelf.
Wine holder can be removed by pulling it straight
out and installed by placing it at the end of the
shelf you want and pushing it inward.
27
Summary of Contents for REFRIGERATOR 3 DOOR
Page 43: ...MEMO 43 ...
Page 44: ......