LG RE-44SZ20RD, Service Manual

Page: 10 / 33

- 10 -
* Contact your dealer or LG service center for replacing the new lamp.
You must replace the lamp when;
¯
The set image get darker or start to be deteriorated.
¯
The lamp indicator is orange.
¯
The message ÒLAMP REPLACEÒ appears on the screen.
* Replace the lamp as below sequence
1. Turn off the projection and unplug the power cable.
(Cool the lamp for more than 1 hour.)
2. Remove the two retainging screws on the lamp cover with a screwdriver of Ò+Ò
type and then lift off the lamp cover.(refer to fig.1)
3. After lifting the lamp cover off, remove the two retaining screw on lamp case with
screwdriver of Ò-Ò type. (refer to fig.2)
4. Pull out the handle slowly and remove the lamp.(refer to fig.3)
5. Insert the new lamp gently into the correct position. Make sure it is inserted cor-
rectly.
6. Tighten the screw you removed in step 3.
7. Replace the lamp cover and tighten the cover screws.
REPLACING THE LAMP
< Fig. 1>
< Fig. 2>
< Fig. 3>