15
EN
Reversing the door
You can reverse the door for your convenience.
WARNING
•
Do not reverse the door while the appliance is
stacked on a washing machine.
•
Before removing the hinge screws, have an
assistant support the weight of the door. The
door could fall on the floor due to the weight of
the door.
•
For safety reasons, two or more people need to
work together to reverse the door.
NOTE
•
The appearance of the screws varies and the
screws must be inserted differently depending
on the position. Make sure the screw is properly
selected before tightening.
1
Open the door and remove 2 screws on the
door hinge. After removing the screws, put
the door down carefully with the front side
facing down to the floor.
Cabinet
Door hinge
WARNING
•
Remove the lower screw first. The door may fall
on to the floor due to its weight and the door can
be damaged.
2
Remove 8 screws on the hinge assembly
from the door.
•
There are 6 screws on the front and 2
screws on the side.
Hinge
assembly
3
Remove the 3 screws from the door latch
assembly which is fixed between the door
and the hinge assembly and then remove the
screw which is fixed on the door hook.
Door latch
assembly
4
Switch between the position the hinge
assembly and door latch assembly and then
tighten the screws in reverse order.
•
Tighten the screw in proper position
referring from 2 to 4 steps.
Door latch
assembly
Hinge
Assembly
Summary of Contents for RC90U2AV2E
Page 38: ...Memo ...
Page 39: ... مذكرة ...