background image

Additional 

T

ips for

Smart Use

21

A

dditional Tips for Smart Use

Spare Parts

Spare parts that are required under the terms
of warranty are provided free of charge. If the 
warranty has expired then spare parts must be
purchased from the service centre.

Accessory Parts

• Accessories available for this product

Disposal of the Dryer 

It is requested that you dispose of your dryer
safely to protect children and others from 
possible injury.
The door, lid and other protruding parts must be
removed and the power cord should be cut off
before safe disposal.

Service Contact

If there is a problem with your dryer, first consult
the Trouble Shooting Guide.  If you cannot find
the error and you are unable to resolve the 
problem, please contact the Service Centre. 

A Customer Service representative will ask you
the following questions:

1.

Name, address and postcode

2.

Phone number

3.

Description of problem

4.

Model number and serial number of your
dryer

5.

Date of Purchase

2.

Condensing Drain Hose and Hose Holder
(Purchased Separately)

1.

Dryer Rack (Included)

Stacking Kit

If stacking is needed, you must stack
the dryer upon an LG washing
machine.
A stacking kit is sold separately.

• The stacking kit can be used for washer

top plate size 550mm and 600mm for
both.

Holder : 2EA, Screw : 4EA

Purchased Separately

Summary of Contents for RC8055AH1Z





























Reviews: