Heat Pump Water Heater
-
5
0 Hz ( R134a)
38
The water temperature will be maintained
according to the setting temperature on
Display
and can be adjusted from 35°C to 60°C.
button to select the water
1
or
temperature.
2
Press
Set
button to finish.
Operation Mode
•
Press
Mode
button repeatedly to select the
operating mode. The active mode is displayed
on the display screen.
HEAT PUMP MODE
This mode minimizes power consumption by
using only heat pump for heating, but has low
recovery.
AUTO MODE
This mode is factory set mode for shipping.
This mode provides relatively low power
consumption and high recovery. This mode
primary uses heat pump for heating.
Heating elements will provide supplementary
heating, if demand is more than the heat pump
can keep up by itself.
TURBO MODE
This mode provides the highest recovery. This
mode uses heat pump and heating element
simultaneously.
Water Temperature Adjustment
VACATION MODE
This feature is recommended when the water
heater is not in used for an extended period of
time. In this mode, tank temperature will be
maintained at about 20 °C to minimize energy
consumption and prevent the water heater from
freezing.
The vacation duration can be set or modified
between 1 and 90 days via LG ThinQ app.
!
DANGER
Higher water temperature increases the
potential for Hot Water SCALDS.
Reset
the
Air
Filter
Alarm
The
device
will
display
alarm (
) reminding
you
to
check
and
clean
the
air
filter
periodically.
•
Press
and
hold
Set
button
about
3 seconds
to
reset
the
alarm.
Change
Temperature
Unit
Temperature
unit
display
on
Screen
can
be
set
to
Fahrenheit
or
Celsius
• Pre
ss
and
hold
button
about
3 seconds
to
change
temperature
unit.
Current
water
Temperature
• Pres
s
and
hold
button
about
3 seconds
Display
will
show
current
water
temperature
of
the
tank
for
5 seconds.
Wi-Fi
PAIRING
FUNCTION
Once
it
is
connected
to
the
internet
through
a
home
Wi-Fi
network, you
can
control
the
appliance
remotely
with
the
application
for
the
smart
phone.
See “SMART
FUNCTION” section for details.
• Pres
s
and
hold
Mode
button
about
3 seconds.
is
displayed
on
the
display
screen.
15
. Controller
!
Press
SCHEDULE MODE
This mode can set only in LG ThinQ application. You can
escape this mode by pressing any button on the water
heater.
ANTI-LEGIONELLA MODE
The water heater automatically performs the anti-
legionella mode once a week. The water temperature will
go up to 60 °C and stay for 1 hour. These temperature
can scald, so we recommend you use a thermostatic
mixing valves. (Default inactive)
Active / Inactive
- Press and hold
Set
button about 3 seconds to
set the anti-
legionella mode active or inactive.
Active: (Display Blinks “Anti-legionella” “Anti-legionella” x 4)
* Once a week operation
Inactive: (Display Blinks “Anti-legionella” x 4)
