24
OWNER’S INSTRUCTION
ENGLISH
OWNER’S INSTRUCTION
25
ENGLISH
Function setting - Automatic Setting for Robot Cleaning
Robot Cleaning is a function that a built-in cleaner performs a filter cleaning automatically when
air-conditioner runs for the scheduled hours.
It programs the robot cleaning function runs manually or automatically.
Press
B
button repeatedly until
X
icon is blinking.
Move to AUTO icon using
H I
button, and press
K
button to select the automatic robot clean-
ing function.
When returning to the manual robot cleaning, press
H I
button to move to MANUAL icon and
press
K
button to select the manual robot cleaning function.
Press
L
button to exit after setup.
If no button is selected for about 60 seconds after setup, it exits the setup mode automatically.
If Set button is not selected before you exit, the changes will not apply.
• Some products may not include robot cleaning function.
Function setting - Auto Cleaning
Auto cleaning is a function to remove moisture or mold after turning off the cooling system by
drying the inside of indoor unit.
Press
B
button repeatedly to select Auto cleaning in the menu.
J
icon will display and the current status of ENABLE or DISABLE icon will blink.
Move to ENABLE using
H I
button, and then ENABLE icon will blink. Press
K
button to set
the auto cleaning function.
When returning to DISABLE, press
H I
button to select DISABLE icon. And then press
K
but-
ton cancel the auto cleaning function.
Press
L
to exit after setup.
If no button is selected for about 60 seconds after setup, it exits the setup mode automatically.
If Set button is not selected before you exit, the changes will not apply.
• Some products may not include auto-drying function.
ENGLISH
