manualshive.com logo in svg

LG PRCKD21E, Installation Manual

Share
Download
LG PRCKD21E Installation Manual Download Page 47

47

ENGLISH

TEST OPERATION

Wired remote controller in-
stallation method

- Connect remote controller cable to the wired

remote controller installation plate as in the
following figure.

h

The remote controller cable shall be pur-
chased separately by the site.

- After fixing cable in the guiding groove, at-

tach the wired remote controller installation
plate in the desired location.

h

Before fixing the remote controller cable in
the guiding groove, install after removing
the closed part of the case in the direction
to install.

- After placing the wired remote controller in-

stallation plate in the place you want to in-
stall the remote controller, firmly fix using
the fixing bolts. (If there is a reclamation box,
install the wired remote controller installation
plate according to the reclamation box.)

After fixing the top parts of the remote con-
troller to the wired remote controller installa-
tion plate as in the figure, push the bottom
part to combine the remote controller and the
wired remote controller installation plate.

If remote controller is separated from remote
controller installation plate, use the driver to
insert in the arrow hole as in the right side fig-
ure, and if you pull toward front direction, the
remote controller is separated.

Use the extension cable to connect CON-
TROL KIT and remote controller.

Purchase and use the extension cable at the
site.

Please contact the specialty store(Hisys) for
purchase of extension cable.

bus@a@bus@b@@gnd@@@@@QRv

gnd@@@@@QRv

Q

R

S

T

Remote 

controller 

cable

Wall

<Combining order> 

<Separation order>

Wall

Wall

Wall

bus@a@bus@b@@gnd@@@@@QRv

601

12V

GND

BUS_B

BUS_A

602

603

604

CONTROL KIT inside

bus@a@bus@b@@gnd@@@@@QRv

Guiding 

groove

<Wired remote controller 

installation plate front side>

<Wired remote controller 

installation plate back side>

bus@a@bus@b@@gnd@@@@@QRv

Wired remote controller

 installation plate

Wall 

Top

Bottom

Fix the remote 

controller cable to 

the guiding groove.

Use the fixing bolts

to firmly fix it on the wall.

1

12 V

2

GND

3

BUS_B

4

BUS_A

During the connection of the cable, com-
ply with the following.
- During the installation of the extension

cable, check the connection direction of
remote controller side and CONTROL
KIT before the installation.

- If the extension cable is reversely con-

nected, the product will not operate.

- Extension cable specification: use 2547

1007 22# 2core 4shield, 5Ø or equiva-
lent level or higher

Summary of Contents for PRCKD21E



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands