Operation
32
1. Connect the charging adapter using USB cable.
2. Connect USB cable to the charging cradle.
3. Connect the charging adapter to the power outlet.
4. Charging is started, when you connect the controller into the
charging pins of charging cradle. Refer to
checking the charging
status
and
Checking battery status
regarding the charging
status of battery. (33 - 34 Page)
y
This unit can be used during charging.
y
You can charge the unit to USB port (for charging) on the
bottom of unit.
y
After the battery is fully charged, unplug the power to save
energy.
y
The unit can be charged with a secondary battery with a
current output of 1 A and more at 5 V voltage.
y
Keep the charging pins of unit free of moisture. Moisture can
cause the charging pins to corrode.
,
Note
BWL1.ASGPLLK_FULL_ENG_MFL71383913.indd 32
2019-09-04 3:42:19