Owner’s & Installation Manual
17
How to use the Mode Selection Button
Out door
Defrost
Preheat
PQRCUCA0
FAN
SPEED
MODE
Room Temp
1
When the fan speedbutton is pressed on the remote
controller for about 3 seconds, the indoor temperature
will be displayed for about 5 seconds, then goes back
to the previous screen.
• Indoor temperature display may differ according to
slide S/W1 setting on the remote controller.
❈
There would be some difference between actual
temperature you feel and room temperature of remote
controller , because the temperature of the position is
not uniform which the remote controller is located on.
Out door
Defrost
Preheat
PQRCUCA0
FAN
SPEED
MODE
Room Temp
1
You can use the Auto Swing Function by pressing both
temperature decreasing button and mode button for
three seconds.
2
If you want to concel the Auto Swing function, press
the temperature decreasing buttn and mode button
again for three second.
❈
Even though Auto Swing Function is working
,
remote
controller is not displayed.
Indoor Temperature Display
Auto Swing
