background image

P/NO. :  MFL69325402(1506-REV00)

Printed in Korea

Please read these safety precautions carefully before using the product.

■ Make sure to connect the power cable a grounded outlet.

  - You may be electrocuted or injured.
■ Use the rated voltage only.

  - The product can be damaged, or you may be electrocuted.
■ During a thunder or lightning storm, unplug the power cable or signal cable.

  - You may be electrocuted or a fire can break out.
■  Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered 

with dust, dry the power plug completely or wipe dust off.

  - You may be electrocuted due to excess moisture.
■  Do not insert a conductor (like a metal chopstick) into one end of the power cable while 

the other end is connected to the input terminal on the wall. Additionally, do not touch the 

power cable right after plugging into the wall input terminal.

  - You may be electrocuted.
■ The appliance coupler is used as the disconnect device.
■  Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries 

according to the instructions.

Safety Precautions

Mini-PC for Signage

PC100/PC200/PC700

Easy Setup Guide

Please read this guide carefully before using this product and keep it for future reference.

Please record the model number and serial number of the product on this guide. You will 

need to provide this information (if applicable) when you require service.

Installation Environment of Mini-PC for Signage

Leave at least 10 cm of space at each side of the product from an obstacle when installing 

the product to ensure sufficient ventilation.

< Install Mini-PC for Signage Attached 

to Monitor >

< Install Mini-PC for Signage>

10 cm

10 cm

10 cm

10 cm

10 cm

10 cm

10 cm

10 cm

*MFL69325402*

Summary of Contents for PC100

























Reviews: