6
Before Installation
(Except for OLW480B, LSW440B)
•
Do not use the product for any purpose other than installing the TV on
a wall.
•
Avoid product damage and safety accidents caused by careless installing
or use of improper or unauthorized wall mount.
•
Follow the instructions in the installation manual for a convenient
installation of the wall mount.
•
Immediately discontinue installation and contact the service centre if
you cannot fully understand the installation process.
Use a professional installer if any installation issues remain after the
inquiry.
•
Installation of this product on a concrete wall or wood stud is
recommended. Installation of this product on other surfaces (Dry wall,
plywood, bricks, etc.) is not recommended. Improper installation may
result in the product falling.
•
Install the product only on a vertical wall.
Do not install on a tilted wall that exceeds building standards or on the
heavily titled wall or ceiling.
LG is not responsible for problems caused by improper installation of the
product, e.g., heavily tilted walls and ceilings.
•
Check the enclosed accessories before installation. We are not
responsible for any lost or damaged accessories after the inner
packaging is opened.
•
When an infant or small child swallows the enclosed accessories,
various safety accidents such as choking may occur. Keep the enclosed
accessories out of the reach of infants and children.
•
When tightening screws, tighten until fully snug.
Avoid using excessive force when tightening the screws. Doing so may
damage the wall and product or reduce the rigidity or performance of
the product.
•
Avoid installing a TV that exceeds the specified tensile load, and do not
allow any external force to be applied to the product.
•
Avoid accidents by using work tools with care during installation.
Tools for Installation
•
“+” shaped screwdriver (manual or electric) / level / drill / Ø 8 mm drill
bit for concrete or Ø 4 mm drill bit for steel
Securing TV to the Wall
(Except for OLW480B, LSW440B)
•
Please use the TV close to the wall after installation.
How to fix anchors and screws
(Except for OLW480B, LSW440B)
Please make sure that:
•
Check that the material and thickness of the wall and finishing material
comply with the installation manual. Before beginning the mounting
process, you must be sure the wall is able to support the weight of the
TV.
•
Should use the enclosed anchors and screws on crack-free concrete walls.
•
Never install the product on a plasterboard or wall made of paper or
medium-density fiberboard (MDF). When it is necessary to install the
product on such wall, anchor screws must be fastened to retaining walls
(concrete) or wood Stud inside the finishing material.
•
The wall mount should be attached to a stud. This usually will not be a
problem, but depending on individual circumstances, there may be cases
when the ability to mount into a stud is not possible. In this case, there
are a variety of drywall anchors, such as toggle bolts, which may provide
a solution. If using drywall anchors, please be sure the anchors and the
wall have the ability to support the weight of your TV. Please note that
the supplied anchors may not be the correct ones for your individual
situation, so you should check with a local professional.
•
Other unspecified walls must be capable of supporting pullout loads of
over 70 kgf (686 N) and shear loads of over 100 kgf (980 N) per fastener.
•
Use an Ø 8 mm drill bit for concrete and a hammer (impact) drill or Ø
4 mm drill bit for wood stud to drill holes.
