14
AI
AI
AI
Auto operation (Optional)
(Artificial inelligence)
1
Press
to turn on the power.
2
Press
repeatedly to select auto operation.
3
Press
or
to select the desired oper-
ation code if the temperature is higher or
lower than the desired temperature.
Code Description
2
Cool
1
Cool slightly
0
Maintain
room
temperature
-1
Heat slightly
-2
Heat
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.
In this mode, the fan speed and the
temperature adjust automatically,
based on the room temperature.
Dimmer (Optional)
1.
2.
Make sure that remote & Air conditioner are ON.
In Dimmer Mode Unit Display will be turned OFF
completely but system will be in running state.
Dimmer Mode will be cancelled if any key
except
is pressed
(Power Key will turn OFF the Unit).
This function may not be supported by
Auto Restart feature (depending on
selected models).
Press to activate/deactivate dimmer
function.
Auto Changeover
(Optional)
1
Press
to turn on the power.
2
Press
repeatedly to select auto operation.
This operation is basically heating or cooling function
of the air
conditioner. But during this operation the
controller change the
operation mode automatically
to keep the temperature within
±2
°
C with respect to
the setting temperature.
Cooling-only models
Heat pump models
NOTE
!
• This function may not be supported, de-
pending on the model.
LIGHT
3
Press or to set the desired
30°C
- The temperature range is 18°C -
temperature.
4 Press repeatedly to select the fan speed.
- is displayed on the display screen.
Mosquito Away
*
Operation (Optional)
Mosquito Away is a device to radiate frequency
which mosquitoes don’t like.
1 Press
- To start Mosquito Away function.
2 Press again to finish
NOTE
!
• You can use this function by pressing without
turning the air conditioner ON. (In this case, Fan speed
can not be changed).
At this time horizontal vane will be at default position &
the fan speed will be low.
• This function can be used with other function like timer,
monsoon.
• This function may not be supported depending on the
model.
• The Mosquito Away performance can be different
depending on the customer’s environment.
*
For detail refer Disclaimer.
Summary of Contents for NSNC096E7K0
