Optional Operation
Installation Manual
25
Installer Setting-Group Setting
Function Code
Master/Slave value
Select Master/ Slave by pressing
button.
(00: Slave, 01: Master)
3
Press button to save.
4
If pressing button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
1
If pressing button repeatedly, it moves to
master/slave selection menu as picture
below.
2
Pressing button will exit settings mode.
❈
After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈
When exiting without pressing set button,
the manipulated value is not reflected.
5
It is a function for settings in group control, or 2-remote controller control.
Please donʼt set this function in case of non-group control.
Remote controller
Function
Master
Indoor unit operates based on master remote controller at group control.
(Master is set when delivering from the warehouse.)
Slave
Setup all remote controllers except one master remote controller to slave at
group control
•
When controlling in groups, basic operation settings, airflow strength weak/medium/strong,
lock setting of the remote controller, time settings, and other functions may be restricted.
Summary of Contents for NHXM40C1A0
Page 30: ......
