Optional Operation
Installation Manual
21
Installer Setting -Test Run Mode
❊
18˚C cooling, High Fan Speed, Airflow direction mode will be operated during 18 minutes with
ignoring room temperature.
❊
After running 18 minutes under test run mode, system will automatically turn OFF.
❊
In case of duct type, the Airflow UP/DOWN function is not displayed.
❊
During test run mode, receiving signal from wireless remote controller will release this operation.
If you press any kind of button, Test Run mode will be released.
Function Code
Set
Press button to start.
3
During the test run, pressing the below
button will exit the test run.
- Select operation, temperature
up/down, wind flow control, wind
direction, start/stop button.
4
If pressing button long for 3 seconds,
it enters into remote controller setter
setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
- Please cancel the right and left of wind
direction for RAC product.
1
Setup figure '01' blinks at the lower part
of indication window.
2
After installing the product, you must run a Test Run mode.
Summary of Contents for NHXM40C1A0
Page 30: ......
