Operating
18
Oper
ating
2
Connect your unit (ND8520) to the
available Wi-Fi network
1. Select your network name (SSID) from “Wireless
Network”.
2. Enter the network key if required.
3. Tap or click “OK” to proceed with network
settings change.
-
Follow the on-screen instructions to change
and confirm the internal Wi-Fi settings of this
unit.
-
Please wait about 30 seconds and more.
4. If this unit is connected to your selected home
Wi-Fi network successfully,
-
AirPlay icon
stops blinking and stays.
-
“CONN” message appears for a moment and
then “AIR” message appears on the control
panel.
If there’s any problem during network
connection, if this unit is failed to connect to
the Wi-Fi network, or if you enter the wrong
password, AirPlay icon
blinks green and
“ERROR” message appears for a moment and
then “AIR” message appears on the control
panel of this unit. In these cases, try the
network connection from “Switch this unit to
Assisted Wi-Fi Setup mode” again.
,
Note
ND8520-FA.BGBRLLK_ENG.indd 18
12. 6. 14. �� 10:57