Connecting
14
C
onnecting
2
Pairing wireless subwoofer
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet. The yellow-green LED
on the subwoofer starts to blink.
2. Turn on the sound bar. The red LED on it
starts to blink and then the sound bar and the
subwoofer will be automatically connected.
When connection is completed, the yellow-
green LED on the subwoofer is turned on and
the green LED on the sound bar is lit up for
about 3 seconds.
Manually pairing wireless subwoofer
When the connection has been failed between the
sound bar and the wireless subwoofer, the red LED
on the subwoofer is turned on. To pair them, follow
the steps below.
1. Press
PAIRING
on the back of the subwoofer.
The yellow-green LED on the wireless
subwoofer starts to blink.
2. Press and hold
p
(Volume) on the unit and
i
(Mute) on the remote control at the same
time. The green LED on the sound bar starts to
blink.
3. After the yellow-green LED on the subwoofer
is turned on, press the buttons on step 2 again.
The connection will be completed.
Information of the colour LED indicators
State
Sound bar LED
Wireless subwoofer LED
Standby
Red
Red
Initial pairing
Red (Blink)
Yellow-green (Blink)
Pairing
Green (Blink)
Yellow-green (Blink)
Connected
Green
[
Off
Yellow-green
Disconnected
Off
Yellow-green (Blink)
[
Red
y
If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y
Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
y
Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y
It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
,
Note
NB5530A-NB_DGBRLLK_ENG.indd 14
2013-06-20 9:18:07
