Using Multi-Room
17
2
Using Multi-R
oom
,
Note for Multi-Room Setup
y
You can make all wireless/wired connection according to the
location of the router. But we recommend that you connect
the bridge to the router using LAN cable and connect
additional speakers for network stability.
y
When the “Firmware update” pop-up appears on Music Flow
Player App, touch to start updating.
y
If you connected a speaker with a LAN cable and installed
other speakers additionally: If the speaker with frequent
sound breaking is not close enough with the cable connected
speaker, additionally install Bridge or other speaker in the
middle location between the speaker connected with LAN
cable and the speaker with sound breaking, and try again.
y
Even if you connected speakers with MUSICflow mesh
network, music sound breaks by ambient signal interference
causing Wi-Fi network defect. In this case, you can try to
change Mesh network channel of MUSICflow system at the
[Settings
à
Advanced settings
à
Mesh Network Channel].
y
When making connection, “Mesh network composition” may
appear and it takes about 30 seconds. This message appears
once in first installation but appear again when you change
network environment.
NP8350-M0.BDEULLA_SIM_MFL69154854_ENG.indd 17
2015-07-27 3:49:47
