FIG.6
FIG.5
Concelo Laundry CRL160D
Installation Instructions
Read all instructions before installing this bin unit.
Failure to install the bin correctly may void warranty.
INSTALLATION VIDEO:
NZ: hideawaybins.co.nz/concelo-laundry-installation
AUS: hideawaybins.com.au/concelo-laundry-installation
Or scan the QR code...
If predrilling using CNC refer to:
NZ: hideawaybins.co.nz/info/downloads
AUS: hideawaybins.com.au/info/downloads
for drilling position CAD files.
W
A
TCH FIRST
New Zealand
Australia
HIDEAWAY NEW ZEALAND
09 426 7456 / [email protected] / hideawaybins.co.nz
HIDEAWAY AUSTRALIA
1800 042 642 / [email protected] / hideawaybins.com.au
Step 1 – Unpack carton
• The hamper and associated parts should be put to one side.
• Inner carton 1 contains collar components to be attached to the door panel.
• Inner carton 2 contains runners and mounting brackets to be mounted to the
cabinet carcase.
Step 2 – Mount collar to door panel
• Open Inner Carton 1 and follow the Concelo CRL160D Laundry Collar Assembly
Instructions within.
Step 3 – Mount runners inside cabinet carcase
• Open Inner Carton 2 and follow the Concelo CRL160D Laundry Runner Installation
Instructions within.
Step 4 – Assemble collar and door panel to runners
• Position collar assembly as shown in Fig 4. TIP: Ensure that runners are pulled
forward, there is a black tab at the front of the runner that can be pulled while
holding the door panel.
Step 5 – Adjust the door panel position
(Fig 5)
• Loosen the 6 door bracket bolts using the 4mm Hex key provided.
• Adjust the door to be square and parallel to carcase and in the correct vertical
position using the adjustment cams.
• Tighten the 6 door bracket bolts.
• Loosen the 6 door mounting screws and adjust the horizontal position of the
door panel.
• Tighten the 6 door mounting screws.
Step 6 – Fit the door bracket covers
(Fig 6)
Step 7 – Install internal tray
and hamper
(Fig 7)
• Lower the door panel until a click is heard. TIP: The door panel may need to be
pushed down slightly.
• Close the product and check that it is approximately level. TIP: If the door panel
is significantly out of level it may indicate that it is not clipped down fully on
one side.
MEMBERS AND SUPPORTERS OF
FIG.7
FIG.4
