A10
Control Panel Functions
This Indicator lights up as blue when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator changes
to flicker.
Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to select an icon in the On Screen
Display.
AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
N1742L: 1280x1024
n
o
it
c
n
u
F
l
o
r
t
n
o
C
VOLUME
Use these buttons to select or adjust functions in the
On Screen Display.
Use these buttons to select or adjust functions in the On
Screen Display.
SOURCE
Use this button to make either D-Sub or X-PORT
connector active. This feature is used when two
input sources are connected to the display.
• D-sub : This menu is not available.
{opzGtlu|GpzGuv{Gh}hpshisl
• X-PORT : When X-PORT signal is active,use button
to decrease or increase the speaker volume on
X-PORT input.
N1942L: 1280x1024
Summary of Contents for N1742LT
Page 27: ...Digitally yours ...
