- 9 -
ADJUSTMENT INSTRUCTIONS
(4) Click on ‘Generation’ ———————————————(1)
If it is done correctly, you will see “Job is Success.”——(2)
Click on ‘close’——————————————————(3)
Check the Generation Data(Confirmation it’s possible
within HDCP\CreatedKeyFile)
(5) It is possible to check how many Generations are created
at this point.
(Fig. 4) shows that you have created 130 Generations and
you will start from 131 next time.
3-3. HDCP Download Method
(1) Input power of Stand-By 5V.
(Download must be executed only when the unit is in
Stand-by)
(2) The RS-232C(9PIN) must be connected to the COM1 on
the PC.
(3) If all the preparation is completed, click on ‘Download’.
(4) If abnormal state (Fig. 7) display then (3) execute.
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6) Normal State
(Fig. 7) Abnormal State