manualshive.com logo in svg

LG MT-50PZ40, MT-50PZ41, MT-50PZ4, Owner'S Manual

Share
Download
LG MT-50PZ40, MT-50PZ41, MT-50PZ4 Owner'S Manual Download Page 25

25

09. Colour (Command:i)

G

To adjust the screen colour.

You can also adjust colour in the video menu.

Transmission

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping1’ (See p.28).

[k][i][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data Min : 0 ~ Max : 64

[i][  ][Set ID][  ][OK][Data][x]

10. Tint (Command:j)

G

To adjust the screen tint.

You can also adjust tint in the video menu.

Transmission

Data Red : 0 ~ Green : 64

* Refer to ‘Real data mapping1’ (See p.28).

[k][j][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data Red : 0 ~ Green : 64

[j][  ][Set ID][  ][OK][Data][x]

08. Brightness (Command:h)

G

To adjust screen brightness.
You can also adjust brightness in the video menu.

Transmission

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping1’ (See p.28).

[k][h][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data Min : 0 ~ Max : 64

[h][  ][Set ID][  ][OK][Data][x]

05. Volume mute (Command:e)

G

To control volume mute on/off.

You can also adjust mute using the MUTE button on
remote control.

Transmission

Data 0  :  Volume mute on (Volume off)

1  :  Volume mute off (Volume on)

[k][e][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data 0  :  Volume mute on (Volume off)

1  :  Volume mute off (Volume on)

[e][  ][Set ID][  ][OK][Data][x]

03. Aspect Ratio (Command:c) (Main picture format)

G

To adjust the screen format.

You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Special menu.

Transmission

Data 0  :  Wide screen (16:9)

1  :  Normal screen (4:3) 
2  :  Full screen (Zoom) 

[k][c][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data 0  :  Wide screen (16:9)

1  :  Normal screen (4:3) 
2  :  Full screen (Zoom) 

* Using the PC input, you select either 16:9 or 4:3 screen

aspect ratio.

[c][  ][Set ID][  ][OK][Data][x]

04. Screen mute (Command:d)

G

To select screen mute on/off.

Transmission

Data 1  :  Screen mute on (Picture off)

0  :  Screen mute off (Picture on)

[k][d][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data 1  :  Screen mute on (Picture off)

0  :  Screen mute off (Picture on)

[d][  ][Set ID][  ][OK][Data][x]

06. Volume control (Command:f)

G

To adjust volume.

You can also adjust volume with the volume buttons
on remote control.

Transmission

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping1’ (See p.28).

[k][f][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data Min : 0 ~ Max : 64

[f][  ][Set ID][  ][OK][Data][x]

07. Contrast (Command:g)

G

To adjust screen contrast. 
You can also adjust contrast in the Picture menu.

Transmission

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping1’ (See p.28).

[k][g][  ][Set ID][  ][Data][Cr]

Acknowledgement

Data Min : 0 ~ Max : 64

[g][  ][Set ID][  ][OK][Data][x]

Summary of Contents for MT-50PZ40, MT-50PZ41, MT-50PZ4

































Reviews:

No comments

Brands by name

Popular brands

Load more brands