5
UNPACKING & INSTALLING
Open your oven door by pressing the
DOOR OPEN
button.
Place the
ROTATING RING
inside the oven and
place the
GLASS TRAY
on top.
Plug your oven into a standard household socket. Make sure your oven is the only appliance
connected to the socket.
If your oven does not operate properly, unplug it from the
electrical socket and then plug it back in.
The
DISPLAY
will count down from 30 seconds. When it reaches 0 it will sound BEEPS.
Open the oven door and test the temperature of the water. If your oven is operating the water
should be HOT.
Be careful when removing the container it may be hot.
YOUR OVEN IS NOW INSTALLED
Fill a
microwave safe container
with 300 ml (1/2 pint) of water. Place on the
GLASS TRAY
and close the oven door. If you have any doubts about what type of container to use please
refer to page 1
6
.
Enter the time by touching [3] and [0].
And touch
30
SECONDS
automatically.
START/Q-START.
