![LG MS1140SE Instruction Manual Download Page 6](http://html.mh-extra.com/html/lg/ms1140se/ms1140se_instruction-manual_1899456006.webp)
— 6 —
B. CIRCUITS
For security reasons, this oven must be connected to
a circuit above 15 amps for
120V, 60Hz or greater of10 amps for 220V, 60Hz. No
other electrical appliances or lighting circuits must be
connected in this circuit. If in doubt, consult a qualified
electrician.
C. VOLTAGE WARNING
The voltage of the outlet should be the same as
specified in the serial plate which is located at the rear
of the apparatus, or beside the oven control panel.
The use of higher voltages can be dangerous and
may result in a fire or other accident causing oven
damage.
Insufficient voltage, moreover, can result in slower
cooking. If your microwave oven is not operating
normally in order to be related to the power source
and AC voltage, disconnect the power cord and
reconnect it.
D. NOT OBSTRUCT
THE AIR VENTS
All vents should be kept clear during cooking. If the
vents are covered during operation of the oven, the
oven may overheat.
In this case, a sensitive thermal safety device
automatically shuts down the oven. The oven will be
inoperable until it has cooled sufficiently.
E. LOCATION OF THE OVEN
Your microwave oven can be located easily in your
kitchen, family room or anywhere in your home. Place
the oven on a flat surface, such as the kitchen counter
or a car specially designed for microwave ovens. Do
not place the oven on a gas or electric stove. The air
flow around the oven is important.
F. RADIO
INTERFERENCE
1. The operation of the microwave oven may cause
interference to radio, television or similar equipment.
2. When there is interference, it can be reduced or
eliminated by taking the following measures:
a. Clean door and sealing surfaces of the oven.
b. Reorient the antenna of your radio or TV.
c. Relocating the microwave oven with respect to the
receiver.
d. Move the microwave receiver.
e. Connect the microwave oven in another outlet, so
that the receiver and the oven are connected to two
different circuits.
INSTALLATION
Summary of Contents for MS1140SE
Page 25: ...Made in China ...