16
INSTALLATION INSTRUCTIONS
ENGLISH
1
With the JET COOL button pressed, press
the RESET button.
2
By using the TEMPERATURE SETTING
button, set function code and setting
value. (Please refer the Intaller setting
code table.)
3
Press the ON/OFF button toward the
indoor unit 1 time.
4
Reset the remote controller to use the
general operation mode.
CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the
results. In this case, free service cannot be provided.
!
RESET
Refer to the Intaller setting code table
on the next page.
INSTALLATION INSTRUCTIONS
Installer setting - how to enter installer setting mode
Summary of Contents for MFL70363707
Page 37: ......
