ENGLISH
Operating Instructions
Ownerʼs Manual
11
Forced operation�
(Tact switch)
Forced Operation
Auto Restart Function
Tips for Filter sign LED
Operation procedures when the remote control can't be used.
Press the tact switch (Forced operation) for 2 seconds.
If you want to stop operation, press again the tact switch.
In case the power comes on again after power failure on the Forced
Operation mode, the operating conditions are automatically set as
follows:
During Forced Operation, the initial mode continues.
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
procedures automatically to the previous operating conditions.
In case of connecting the simple wired remote controller, plasma image is not displayed you press the forced
operation button.
1. Filter sign lamp (LED) is ON.
2. If LED indicating filter sign lamp is ON, clean the filter.
3. After cleaning the filter, press the Timer button and
◀
button of wired remote controller at the same time for 3 sec.
Then filter sign LED is OFF.
Heat pump Model
Cooling Model
Room Temp. ≥ set Temp.4°F(2°C) Room Temp. < set Temp.4°F(2°C)
Operating mode
Cooling
Cooling
Heating
Indoor FAN Speed
High
set available
set available
Setting Temperature
72 °F(22°C)
set available
set available
Summary of Contents for MFL42803013
Page 15: ......