Operation
Oper
ation
4
Radio Operations
Be sure that both FM and AM aerials are
connected. (Refer to the page 19)
Listening to the radio
1.
Press
RADIO&INPUT
until FM or AM (MW)
appears in the display window.
The last received station is tuned in.
2.
Press and hold
TUNING (-/+)
for about
two seconds until the frequency indication
starts to change, then release. Scanning
stops when the Unit tunes in a station.
or
Press
TUNING (-/+)
repeatedly.
3.
Adjust the volume by rotating
MASTER
VOLUME
on the unit or by pressing
VOL
(+/
-
)
on the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM
(MW).
Before tuning, make sure that you have turned
down the volume.
1.
Press
RADIO&INPUT
on the remote control
or
RADIO
on the unit until FM or AM (MW)
appears in the display window.
2.
Press or rotate to select a desired frequency;
- On the remote control:
TUNING
(-/+)
- On the unit:
MULITI JOG DIAL
or
.
/
>
3.
Press
ENTER
a preset number will flash in
the display window.
4.
Press
PRESET
(-/+) to select the preset
number you want.
5.
Press
ENTER.
The station is stored.
6.
Repeat steps 2 to 5 to store other stations.
7.
Press to select a preset station;
- On the remote control:
PRESET -/+
or
0 to 9 numerical buttons
- On the unit:
n
PRESET -
/
N
Deleting a saved station
1.
Press
PRESET - / +
to Select a preset
number you want to delete.
2.
Press
CLEAR,
the preset number will blink
in the display window.
3.
Press
CLEAR
again
,
to delete the selected
preset number.
Deleting all the saved stations
1.
Press and hold
CLEAR
for two seconds.
"ERASE ALL" will flash up on the unit display.
2.
Press
ENTER or CLEAR
to erase all saved of
the radio stations.
Improving poor FM reception
Press
PLAY (MONO/STEREO)
on the remote
control. This will change the tuner from stereo
to mono and usually improve the reception.
MDS715-A0P_DTUNELK_ENG_4631.indd35 35
2010-03-29 ¿ÀÈÄ 11:13:41
