Operating
28
Operating
3
Radio Operations
Be sure that both FM and AM aerials are connected.
(Refer to the page 14)
Listening to the radio
1. Press
FUNCTION
on the remote control or
TUNER
on the unit until FM or AM appears in
the display window. The last received station is
tuned in.
2. Press and hold
TUNING (-/+)
on the unit or
TUN.(-/+)
on the remote control for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press
TUNING (-/+)
on the unit or
TUN.(-/+)
on the remote control repeatedly.
3. Adjust the volume by rotating Volume knob on
the front panel or by pressing
VOL (-/+)
on the
remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume.
1. Press
FUNCTION
on the remote control or
TUNER
on the unit until FM or AM appears in
the display window.
2. Select the desired frequency by using
TUNING
(-/+)
on the unit or pressing
TUN.(-/+)
on the
remote control.
3. Press
PROG./MEMO
. preset number will fl ash in
the display window.
4. Press
PRESET (
W
/
S
)
to select the preset
number you want.
5. Press
PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET
(
W
/
S
)
.
Deleting all the saved stations
1. Press and hold
PROG./MEMO.
for two seconds.
“ERASE ALL” will fl ash up on the unit display.
2. Press
PROG./MEMO.
to erase all saved radio
stations.
Improving poor FM reception
Press
PLAY
(
d
)
,
MO./ST
on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
MDT356-A5U-ARUSLL-ENG.indd 28
MDT356-A5U-ARUSLL-ENG.indd 28
11. 04. 05
6:00
11. 04. 05
6:00
