How to Install TV Legs
Accessory:Legs 4EA(Front 2EA & Rear 2EA)
1. Lay the TV set down on a soft cloth as shown
in the figure.
2. Fully insert the two supporting legs marked
with "FRONT" into the holes at the bottom of
the front cabinet,and secure them as shown
in the figure.
3. Fully insert the two supporting legs marked
whth "REAR" into the holes at the bottom of
the rear cabinet and secure them,as shown
in the figure.
4. Lift up the legs of the TV set as shown in the
figure.
Note:
To avoid any damage caused by the TV set
falling over by accident,please affix the
supplied suspension loop to a proper position
on the wall behind the TV set, and secure
the loop with screws(not supplied),as shown
in the figure.Then, use the supplied rope to
connect the TV set and the suspension
loop.The rope length should be properly
adjusted to fit the distance between the TV
and the wall.
Screw hole
