Selecting the on screen language
1. Press the MENU button and then
D
/
E
button until the menu is displayed.
2. Press the
G
and then
D
/
E
button to select
Language
.
3. Press the
G
and then use
D
/
E
button to
select the desired language.
From this point on, the on-screen display will
be presented in the language of your choice.
4. Repeatedly press the MENU button to exit.
Memorizing Channels
This is the function to memorize all the active
channels in your area before you can use the TV.
There are two ways of memorizing channels.
You can use either.
One is called AUTO PROGRAM and the other is
called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete,
you can manually add or delete those channels.
number buttons (0 ~ 9) to change as .
Memorizing the Channels by
AUTO PROGRAM
AUTO PROGRAM searches and memorizes all
the active channels in your area then you can
select the desired channel with the
D
/
E
buttons.
Selecting the Channel
Press the
D
/
E
button to conveniently select the
upper or lower channel then the channel being
viewed, or NUMBER buttons to directly select
the desired channel.
Adjusting the Volume
Press the
G
button to increase the volume level
or
F
button to decrease the volume level.
To mute the sound, Press the MUTE button.
The word
Mute
is displayed.
It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE
button again or VOL
F
/
G
button.
Basic TV operation
5
Various function
Setting the Clock
Before setting the on/off timer, first you should
set the current time.
Setting the Off Timer
This is the function to automatically switch the
TV to standby mode at a preset time.
Note: If the same time is set for the on time and
off time, only the off time operates.
Setting the On Timer
This is the function to automatically turn the TV
on at a preset time and channel.
Notes: •If you don’t press any button within 2
hours after turning on the TV set by ON TIMER
function, the set will be automatically switched
back to standby mode.
•TV must be in standby mode for the On timer to work.
Auto Off
If there is no input signal, the TV is switched to
standby mode automatically in 10 minutes.
Key Lock
The TV can be set so that the remote control is
needed to control it.
This feature can be used to prevent
unauthorized viewing.
Notes : • With the key lock on, the display
Key
lock
appears on the screen if any button on the
front panel is pressed while viewing the TV.
•This programmed to remember which option it
was last set to even if you switch the TV from
standby mode.
Auto Demonstration (some models)
Auto demonstration allows you to review all the
menus programmed in the TV set.
Favorite channel memory
Favorite channel memory is a convenient
feature that lets you quickly scan up to five
channels of your choice without having to wait
for the TV to scan through all the in-between
channels.
To select the favorite channel, repeatedly press
the FCR (Favorite Channel Review) button.
Eight channels programmed appear on the
screen one by one.
Adjusting the Fine
This function is to adjust the picture if poor
signal received from broadcasters causing
horizontal stripe, twisted picture, no color,
and/or noise.
1. Press the MENU button and then
D
/
E
button the until the menu is displayed as
shown right.
2. Press the
G
and then
D
/
E
button to select
Manual.
.
3. Press the
G
and then
D
/
E
button to select
Fine
.
4. Press the
G
button to enter the
Fine
mode.
5. Press the
F
/
G
button to tune the desired
picture condition.
6. Press the ENTER (
A
) button to memorize.
7. Repeatedly press the MENU button to exit.
Notes : • To release the memorized fine tuning,
program again the fine-tuned channel by AUTO
PROGRAM or MANUAL PROGRAM.
•If the finely tuned channel is memorized, the
color of the channel number changes to yellow.
