manualshive.com logo in svg

LG MASTER-K 120S Series, User Manual, Page: 294 / 306

Share
Download
LG MASTER-K 120S Series User Manual Download Page 294

Appendix 1  System Definitions

 

 

App1-2

 

 

(2) Editor option 

 

•

 Monitor display type 

    - Select the desired type in the monitor display type(4 types). 

 

•

 Source File Directory :   

  - You can set directories for the files to be created in KGLWIN. 

  - In Source Directory, KGLWIN saves source program files of program, parameter etc. 

 

•

 Auto save 

    - This function is to set the time interval for Auto saving (Range : 0 ~60 min) 

- Automatically saved file is saved in the current directory.   

- The file is automatically deleted when the program window is closed. Therefore if a program cannot be saved by 

"Program Error" before program is not saved, you can recover some program by loading auto saved file. 

- This function is to set the time interval for Auto saving. 

- When set to 0, auto save function is disabled. 

 

 

Summary of Contents for MASTER-K 120S Series



















































































































































































































































































































Reviews:

No comments