LG LXFS28596 Series Service Manual Download Page 98

Page: 98 / 108

14-1-7. How to operate the Hygiene fresh filter

Auto Mode

Hygiene Fresh

After 4 hours

POWER Mode

1. Fan installed on the multi.duct on the rear side of the filter operates.

2. Fan is repeatedly turned on for 10 minutes and then off for 60 minutes.

3. If the R-door is opened while the fan is operating,the fan will be turned off,and when the R-door is closed,the fan will be

turned on.

4. LED near the filter installed on the multi duct is turned on when the R -door is opened and off when closed.

14-1-8. AUTO Mode

1. Fan installed on the multi.duct on the rear side of the filter operates.

2. Fan is repeatedly turned on for 10 minutes and then off for 5 minutes for 4 hours,and then automatically switches over to

AUTO Mode.

3. If the R -door is opened while the fan is operating,the fan will be turned off,and when the R -door is closed,the fan will

be turned on.

4. LED near the filter installed on the multi duct is turned on when the R -d oor is opened and off when closed.

14-1-9. POWER Mode

Summary of Contents for LXFS28596 Series













































































































Search results

Summary of Contents for LXFS28596 Series

Reviews:

Related manuals for LXFS28596 Series

Brands by name

Popular brands

LG LXFS28596 Series, Service Manual

Search results

Summary of Contents for LXFS28596 Series

Reviews:

Related manuals for LXFS28596 Series

Brands by name

Popular brands