LG LWA3BP2A, Service Manual

Page: 7 / 38

- 12 -
The remote control transmits the signals to the system.
Features of the Remote Control- Door Closed
1
START/STOP BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
2
OPERATION MODE
SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE
SETTING BUTTONS
Used to select the room temperature.
3
4
INDOOR FAN SPEED
SELECTOR
Used to select fan speed in four steps
Low, Medium, High, or CHAOS*.
JET COOL
Used to start or stop the speed
cooling. (Speed cooling operates
high fan speed in cooling mode).
5
AIR SWING BUTTON
Used to stop or start vertical louver
movement.
6
Operation Mode
Cooling Mode
Fuzzy Mode
Dry Mode
(Cooling Model)
- Your unit shall have either Type A,Type B, Type C or Type D Remote Control
* Available in selected models. In other models, CHAOS is same as high speed.
ON
Signal transmitter
Flip-up door
(closed)
2
4
5 1
3
6
1
3
5
4
Flip-up door
(closed)
2
Signal transmitter
ON
Signal transmitter
Flip-up door
(closed)
2
4
5 1
3
JET COOL TEMP A/SWING
FAN SPEED POWER
O L
JET C
O
A/SWING
POWER
TEMP
FAN SPEED
MODE
MODE
6
1
3
5
4
Flip-up door
(closed)
2
Signal transmitter
TYPE A TYPE B TYPE C TYPE D
6 6
About the remote control on the system
The Remote Control unit will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Control unit and the air conditioner.
Precaution: