ENGLISH
15
OPERATION
Wireless Remote Control
Inserting Battery
1
Push out the cover on the back of the
remote control with your thumb.
2
Pay attention to polarity and insert one
new AAA 1.5 V battery.
3
Reattach the cover.
NOTE
●
One new battery is supplied with the air
conditioner for use in the remote control.
●
Do not use a rechargeable battery. Make sure
that the battery is new.
●
In order to prevent discharge, remove the
battery from the remote control if the air
conditioner is not going to be used for an
extended period of time.
●
Keep the remote control away from extremely
hot or humid places.
●
To maintain optimal operation of the remote
control, the remote sensor should not be
exposed to direct sunlight.
6
Clean Filter
The Clean Filter LED lights up to notify you
Temp
and
together on the control panel to turn off the
Clean Filter light.
NOTE
●
control panel, not the remote control.
●
This feature is a reminder to clean the air
light turns on after 250 hours of operation.
7
Temperature Control
The thermostat monitors room temperature
to maintain the desired temperature. The
thermostat can be set between 60 °F–86 °F
(16 °C–30 °C). Press
or
arrows to
increase or decrease temperature setting.
NOTE
●
Auto Restart:
If the air conditioner turns off due
to a power outage, it will restart automatically
once the power is restored, with the same
settings as were set before the unit turned off.
●
Energy Saver:
The unit defaults to the Energy
Saver mode each time the unit is switched on
except in Fan mode or when power is restored
after an electrical power outage.
●
The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.
