LG LW342 series, Owner'S Manual

Page: 30 / 76

30
Operation and settings
Backup and Restore
> Backup: To take a backup all of the settings.
If necessary, it make possible to return to a
backuped configuration. Click this button
and follow the instructions on the browser
to specify the folder and save the setting
data of the IP device. This configuration
backup can be restored whenever needed.
> Restore:
1. Click the [Browse] button.
2. Find and open the file in which the con-
figuration setting data is stored.
3. Click the [Restore] button and the sys-
tem settings will be restored and reboot
the system.
Notes:
• Backup and Restore can happen on IP device
having the same version of firmware. This
feature is not intended for multi-configura-
tions or for firmware upgrades.
• The [Backup] function is allowed in HTTP
protocol but not in HTTPS protocol.
Firmware
> Upgrade
1. Click the [Browse] button.
2. Find and open the firmware file.
3. Click the [Upgrade] button to update
the firmware.
Note:
When you upgrade the system, it may take
some minutes to be done. Do not close the
browser while the upgrade is in progress. If
you close the browser, it may cause a mal-
function. You should wait until the confirma-
tion window is displayed. When the upgrade
is finished, the confirmation window will be
displayed.
> Initialize: The [Initialize] button should be
used with caution. Clicking it will return all of
the IP device’s settings to the factory default
values. (Except for Network settings, PTZ
Protocol and Preset settings.)