LG LW332 Series Owner'S Manual Download Page 47

Page: 47 / 84

Operation and settings

SD Card settings

Basic

SD Card Recording

Always: Start the recording at once.

Recurrence Pattern: The recording is started

according to the setting time of the selected

day.
Note:

You can not set the time for a day. It will

start the recording for the selected day of

the time.

Never: [Always] and [Recurrence Pattern]

recording functions are not activated.

Overwrite: If the micro SD card has

insufficient space and this option will be

activated. It will overwrite the oldest data.

DiskFull Notification: Sends an warning

e-mail to the SMTP server when the micro

SD card has fully recorded. Select the SMTP

server from the drop-down list. You should

setting to set this function.

Summary of Contents for LW332 Series





















































































Search results

Summary of Contents for LW332 Series

Reviews:

Related manuals for LW332 Series

Brands by name

Popular brands

LG LW332 Series, Owner'S Manual

Search results

Summary of Contents for LW332 Series

Reviews:

Related manuals for LW332 Series

Brands by name

Popular brands