background image

6

Do not place heavy object
on the power cord and take
care so that the cord should
not be pressed.

• There is danger of fire or

electric shock.

If water enters the product,
turn off the the power switch
of the main body of appliance.
Contact service center after
taking the power-plug out
from the socket.

Do not clean the air
conditioner with water.

• Water may enter the unit and

degrade the insulation. It may
cause an electric shock.

Turn off the power and
breaker firstly when
cleansing the unit.

• Since the fan rotates at high

speed during operation, it
may cause injury.

Do not put a pet or house
plant where it will be
exposed to direct air flow.

• This could injure the pet or

plant.

Do not use this appliance
for special purposes such
as pets, foods, precision
machinery, or objects of art.

• It is an air conditioner, not a

precision refrigeration system.

Always insert the filter
securely.
Clean it every two weeks.

• Operation without filters will

cause failure.

Use a soft cloth to clean. Do
not use wax, thinner, or a
strong detergent.

• The appearance of the air

conditioner may deteriorate,
change color, or develop
surface flaws.

Do not drink water drained
from air conditioner. / Do
not direct airflow at room
occupants only.

• It contains containments and

will make you sick. / This
could damage your health.

Wa

x

Thinner

Summary of Contents for LW1004ER, LW1204ER, LW1404ER,




























Reviews: