LG LW1000ER Owner'S Manual Download Page 8

Page: 8 / 18

TIM

VENT

OPEN

Part A

Adjusting the Air Flow Direction

Operating
Instructions

Vent Control

For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation.

OPEN the vent to discharge stale air.

Adjusting the Air Flow Direction

• Recommended orientation of louvers

Adjust louvers to face upwards when cooling to maximize cooling efficiency.

Airflow can be adjusted by changing the direction of the air conditioner's louvers. This can also increase the
cooling efficiency of the air conditioner.

• Adjusting Horizontal Air Flow Direction

Adjusting the vertical louvers left and right will
change horizontal airflow.

• Adjusting Vertical Air Flow Direction

Adjusting the horizontal vane up and down will
change vertical airflow. The vane can be adjusted
by nudging the back or up and down of the vane.

NOTE : Before using the ventilation feature, position the

vent lever by pulling Part A out straight and
snapping it into place.

Adjusting horizontal air flow

Adjusting vertical air flow

Summary of Contents for LW1000ER



















Search results

Summary of Contents for LW1000ER

Reviews:

Related manuals for LW1000ER

Brands by name

Popular brands

LG LW1000ER, Owner'S Manual

Search results

Summary of Contents for LW1000ER

Reviews:

Related manuals for LW1000ER

Brands by name

Popular brands