ENGLISH
Sash track
Front Angle
About
1
/
2
"
Screw(Type B)
6
Screw(Type B)
6
Sill Support
2
Sill Support
2
Foam-Strip
8
Fig. 5
Type C
7
Fig. 6
Screw(Type A)
TIME
MODE
TEMP
POW
ER
FAN
SPEE
D
COO
L
INDO
OR
DESIR
ED
ENER
GY
SAVE
R
AIR
PURY
FIER
AUTO
REST
ART
FAN
FAN
DRY
HEAT
DEFR
OST
Screw
(Type A)
Power cord
Fig. 7
Fig. 8
15
The cabinet should be installed with a very slight tilt
(about 1/2") downward toward the outside
(See Fig. 5).
Adjust the bolt and the nut of Sill Support
for
balancing the cabinet.
Attach the cabinet to the window stool by driving
the screws
(Type B: Length 16mm (5/8 inch)
and below.) through the front angle into window
stool.
Pull each Frame Curtain
fully to each window
sash track, and repeat step 2.
Attach each Frame Curtain
the window sash using
screws
(Type C). (See Fig. 6)
CAUTION: Do not drill a hole in the bottom pan.
The unit is designed to operate with
approximately 1/2" of water in bottom pan.
There is no need to add water if the pan is dry.
Slide the unit into the cabinet. (See Fig. 7)
CAUTION: For security purpose, reinstall screws (Type A)
at cabinet's sides.
Cut the Foam-Strip
to the proper length and insert
between the upper window sash and the lower
window sash. (See Fig. 8)
11
10
9
8
7
6
