12
Mounting the Lens
Pin layout for the lens iris output connector
No.
DC type lenses
VIDEO type lenses
1
Damping -
Vcc (+9V)
2
D
Not used
3
Drive +
Video
4
Drive -
Ground
Rewire the lens iris plug
1. Cut off the plug of the lens cable, cut off
approximately 8mm of the insulation, and then
strip approximately 2mm of the ends of the
cable sheaths.
2. Solder the ends of the cable wires to the ends
of the pins, and then attach the cover of the
lens iris plug.
8mm
2mm
LVC-SX811HP_ENG_MFL-180 7/19/07 3:04 PM Page 12