LG LVC-S10, Operating Instructions Manual

Page: 5 / 23

5
Control names and Location
1. Tripod adaptor
This adaptor can also be attached on the bottom of the camera
2. Flange-back Adjusting Lever
This lever is used to adjust the back focal length or picture focus. Rotate this
lever clockwise for a C-mount lens or counterclockwise for a CS-mount lens.
3. Function key cover
4. Function key button (see page 13)
5. Auto Iris Lens Connector
This connector, which is built-in 4 pin male connector, is used to connect with
the auto iris lens.
6. CCD Cover
7. Power indicator
This indicator light up when the power of this camera is on.
8. Connection Terminal
These 4 Terminals are used to connect the auto iris lens which should be
connected by wire.
The first terminal from the left is used to connect Alarm Output.
9. Power Cord Socket
This socket is used to connect the power cord.
10.Auto Iris Lens Selection Switch
This switch is used to set the mode with user’s preference.(user selection)
11.V-PHASE adjustment screw
12.AC/DC Compatible Input Terminal(DC12V/AC24V)
13.External Sync.Input jack
(GEN-LOCK/VD LOCK)
14.Video Output Jack
OPERATING CONTROLS AND THEIR FUNCTIONS
POWER
Alarm Out
Da-
VCC
Video GND
Da+ Dr+ Dr-
AC 100-240V~
Class 1 Only
GEN-LOCK VIDEO OUT
V.PHASE
VIDEO
ELC
DC
POWER
Alarm Out
Da-
VCC
Video GND
Da+ Dr+ Dr-
Class 2 Only
1
2
GEN-LOCK VIDEO OUT
V.PHASE
VIDEO
ELC
GND
DC
DC 12V
IN
AC 24V
IN
1 2
3 4 5 6
7 8
9 10 11 12 13 14
S101,S201’ S S10,S20’ S