LG LV700N-D1, Instruction Manual

Page: 5 / 14

2. - Tighten the M3 Tapping Screw (A) to
fix the Ceiling Mount on the installation
label.
3. - Push the Lock Button and turn the B-
ase Deco counterclockwise simultane-
ously.
- Remove the Base Deco.
4. - Loosen the Dome Frame Lock Screw
(C).
- Remove the Dome Frame.
5. - Adjust the Tilt(Up/Down) and the Pan
(Left/Right).
6. - Install the Dome Frame.
- Tighten the Dome Frame Lock Screw
(C)
7. - Install the Base Deco.
- Turn the Base Deco clockwise.
1. - Use the installation label to check the
place that you wish to install.
Holder
OSD Board
Revolver
Service Output
FRONT
Ceiling Mount
3
Holder
Revolver
Revolver
Base
4~6
Direct Screw
Front Front
Direct Screw
Surface Mount Cable Hole
Cut Off Celing Line
M4 Self Topping Screw
for Nount
P/N : MEZ57336601
Remove Dust On Celing
and Stick It
Dome Frame Lock Screw(C)
Dome Frame Lock Screw(B)
•
•